LDR 504 1150 Washing Machine Corrugated Drain Hose, 6-Foot

Pinned on April 4, 2013 at 9:35 pm by alexp

LDR 504 1150 Washing Machine Corrugated Drain Hose, 6-Foot

6 Foot long plastic corrugated discharge hose attaches to discharge outlet with 1″, 1-1/8″ or 1-3/8″ connection. Includes stainless steel hose clamp. Formed outlet end easily fit sink or drain pipe.

Product Features

  • 6-Inch Rubber corrugated plastic
  • Formed outlet ends
  • Attaches to 1-Foot, 1-1/8-Inch, or 1-3/8-Inch connections
  • Includes stainless steel hose clamps
  • Limited Lifetime Warranty

Facebook Comments



C. Sackett says:

Great hose Great quality, doesn’t kink like the rubber hoses. My machine came with a 5ft hose, needed the extra foot to reach the drain.

mr Burk says:

excellent-fits most brands of washing machines (Not all) I bought 10 of these and was pleased with them, as I repair appliances and use quite a few, this fits Maytag top loaders and almost all Whirlpool top loaders and front loaders that attach at the back of the washer. This will not fit a Frigidaire or GE top loader. Be sure after you put this on your washer and you shove this in the drain that you use a wire tie made of plastic to wrap around the drain hose and maybe one of the water fill hoses, so as to prevent the drain hose from jumping out of the drain and flooding your laundry room (You do this with all drain hoses). In a pinch you could also use a long shoestring.Mr Burke

Reply to mr Burk Cancel reply

2013 BestWasherDryers.com. All Rights Reserved. Disclaimer and Privacy. Disclosure: Compensated Affiliate.